When buying acrylic award blanks wholesale, specify the piece as you need to receive it for decoration. Confirm which faces arrive undecorated, how the plaque fits its base and how the finish will be protected in transit. Use a blank from the proposed construction to test your process before releasing the batch.

Specify which parts of the award arrive undecorated
A blank order can include a finished edge, a separate base and a contrasting accent. State which parts you expect to receive and which faces must be clear of names, logos and other decoration. For a finished order, give the supplier the artwork and recipient list for proof approval. Compare finished award and plaque formats.
Choose an outline from the award blanks product gallery or attach a sketch. Mark your usable decoration area, keep-out zones around the facets and joint, and the direction in which the plaque will stand during decoration.
Check the surface, base and protection on a sample
| Check | Specify before quoting | Verify on the sample |
|---|---|---|
| Material and colour | Required acrylic type, clarity or tint, and thickness for the plaque and base | Check the material identification and appearance. Measure each part at the agreed points. |
| Undecorated surface | Print or engraving process, usable face, surface finish and any required pretreatment or coating | Try your process on the proposed blank. Check alignment and the result against your own acceptance criteria. |
| Base and assembly | Included parts, base footprint, joint and whether pieces ship assembled or loose | Dry-fit the proposed parts if supplied loose. Check standing alignment and access for your decorating fixture. |
| Individual protection | Film or wrapping by face, edge separation and matched packing for bases | Open a representative pack. Check contact marks, protected edges and whether each plaque can be matched to its base. |
Ask whether the film is present during shipment and when it should be removed for your process. If you need a particular coating or material grade, confirm it in the specification and test the proposed blank under your process conditions.
Agree what the receiving team will check
Give each outline, thickness and base combination an ID. Put counts by ID on the packing list and agree how you will identify loose bases in mixed cartons. On receipt, use the approved blank to compare shape, surface and edge appearance, then check fit with the matching base.
Keep the approved sample ID, any decorated trial and carton labels with the order. Use the bulk inspection record to document the units checked and any damage or fit issue by carton.
Send the blank and packing requirements together
- Outline reference, overall dimensions and usable area for decoration.
- Acrylic type, colour, thickness, edge finish and faces to leave undecorated.
- Intended decoration process, sample trial and any required coating or preparation.
- Base drawing, assembly condition, quantity by version, individual protection and destination.
Browse the acrylic award category for shape references. Send your award blanks RFQ with your drawing and any checks you need the sample to pass.
